![To Increase YouTube Subscribers Must Use These Service Provider [New]](https://businessleed.com/wp-content/uploads/2022/11/To-Increase-YouTube-Subscribers-Must-Use-These-Service-Provider-New-360x180.jpg)
Fake watches: Since the end of last year and the beginning of this year, Patek Philippe Nautilus 5711A was officially discontinued. After 10 months, the replacement of 5711A, a new generation of Patek Philippe Nautilus 5811G (platinum shell), was officially launched.
After seeing the 5811G, many watch fans found that the 5811G is a little larger than the 40mm of the previous generation 5711A in addition to the 41mm size. The dial color is a gradient blue with light inside and dark outside, and there is no difference elsewhere. So, let me go straight to the topic and start with the main changes of the new generation 5811G.
The first change of the new generation 5811G, the “two-piece” case structure.
Patek Philippe’s new-generation Nautilus 5811G uses a “two-piece” case construction. The previous generation Nautilus 5711A used a “three-piece” case structure. What does that mean?
Most of the famous Replica Swiss Watches on the market now have a “three-piece” structure. The watch consists of a bezel, a case, and a bottom cover. Since its introduction in 2006, the Nautilus 5711 has used a “three-piece” case construction.
The new generation of Nautilus 5811G uses a “two-piece” case structure. The case and the bottom cover are integrated into a whole. The watch is directly composed of the bezel and the main body of the case. Piece”.
“Three-piece” case: first put the bezel and case together, watch the movement, put it in from the back of the watch, and then put the bottom cover on, it’s OK, like a sandwich.
“Two-piece” case: Because the case and the bottom cover are combined into one, like a pan, the watch movement should be put in from the front of the watch, and then the dial and bezel should be covered.
Everyone, please note that because the previous generation 5711A needs to screw the bottom cover, there are 6 rectangular “screw openings” on the bottom cover of the watch; while the new generation 5811G has no independent bottom cover, there is no “screw opening” on the back of the watch, and because 5811G It is a gold watch, so there is a dog head and a golden scale on the back, so that you can identify the old and the new at a glance.
On the new generation Nautilus 5811G, Patek Philippe uses a “two-piece” case structure, which is normal. Because the Patek Philippe Nautilus was born in 1976 and launched the first model 3700, it has always been a “two-piece” case structure. When Gerozunda designed the Nautilus, it was “two-piece”. When the previous generation 5711 was launched in 2006, it was changed to a “three-piece” case, which took more than 10 years. Now the new generation 5811G has been replaced with a “two-piece” case.
For watch fans, whether it is the “two-piece set” of the new generation 5811G or the “three-piece set” of the previous generation 5711, the case structure has no effect on the player. Water resistance is still 120 meters.
The second change of the new generation 5811G is the new pull mechanism fork lever.
In the official introduction of the new generation 5811G, it is mentioned that the split arbor is replaced by a new pull mechanism fork system. What is this?
This is actually related to the resumption of the “two-piece” case of the new generation 5811G. Due to the “two-piece” case, the movement needs to be removed from the front of the dial. Patek Philippe fake redesigned the crown and the crown shaft part, that is, the new pull mechanism fork system.
The crown, crown shaft, etc. can be taken out from the front of the dial together with the random core. There is no need to disassemble and separate the crown and crown shaft like the Nautilus 3700/3800 in the early history, and cannot be taken out together with the core.
For players, this change still has no effect. It’s just a matter of Patek Philippe’s own production, repair and maintenance.
The third change of the new generation 5811G, the length of the buckle can be fine-tuned.
The new-generation 5811G clasp adds a length fine-tuning function, and the folding clasp can be extended by 2 mm to 4 mm. The previous generation 5711 cannot adjust the buckle. For players, the fine-tuning of the clasp has a lot to do with you, especially in summer, when the wrist is sweaty and the strap is a little tighter and looser, the fine-tuning of the clasp is very useful.
In the new generation 5811G, the movement has not changed.
The new generation 5811G uses the Patek Philippe 26-330 automatic movement (hereinafter referred to as 330). Some people say that the 5811G was replaced with a new movement, but in fact it did not, because the previous generation 5711 had already used the 330 movement. Some players will say that the previous generation 5711 did not use the 324 movement? Here you should pay attention that the 5711 has used the 324 movement for a long time, but around 2019, it began to replace the 330 movement, and the later model 5711 is already the 330 movement.
The Patek Philippe 330 movement is a replacement model for the 324 movement, and is currently gradually replacing the 324 movement. The 330 movement is developed on the basis of the 324 movement. The main improvement lies in the use of a new type of nickel-phosphorus alloy three-wheel (the teeth are replaced by 22-micron elastic reeds) in the travel gear train, and the stop-second function is added ( 324 movement cannot stop seconds), improved automatic rotor and winding clutch gear, etc.
The power of the 330 movement is still 45 hours, fine-tuning with no card weights, silicon hairspring, with the Patek Philippe mark, with an error of -3/+2 seconds per day. Polished and decorated to maintain the top level of Patek Philippe.
Why use platinum 5811G instead of steel shell 5711A, will there be a steel version at the back?
Patek Philippe Platinum 5811G, replacing the steel shell 5711A, can be said to be in line with Patek Philippe’s previous statement. In the past year, Patek Philippe President Thierry Stern has repeatedly mentioned the following point in many interviews: Patek Philippe’s attention is not on steel best fake watches, and the follow-up model of the Nautilus 5711 will be made of precious metals.
I personally think that in 2021, Patek Philippe’s sales will be surpassed by Audemars Piguet. If Patek Philippe wants to increase its sales, it can only work on the price of a single watch. After all, it is impossible for Patek Philippe’s production to increase much. Before the steel case 5711A, even if it was fried to the sky, it turned over several times, but the money that exceeded the public price did not reach the Patek Philippe watch factory. The 5711A of the steel shell has now become the 5811G of the 18K white gold shell, and the single-table price and single-table profit will go up at once. I think this is one of the reasons why the platinum 5811G replaces the steel 5711A.
At the same time, there is a view that even if Patek Philippe will launch the 5811 with steel shell, then according to Patek Philippe’s consistent new rhythm, it will have to wait until at least 2024. Because after the platinum 5811G, Patek Philippe should launch the rose gold 5811R next year, and then it will be the turn of the steel watch.
