How to Make Your Own Car Shine

Introduction

In order to improve the smoothness and gloss of the paint on your vehicle, you need use car polish. Car polish is a moderately abrasive liquid substance. Used before waxing, it may change a dull-looking older car into a near-new vehicle with a glossy sheen that rivals that of new. It is advisable to use a power polisher or an electric random orbit sander with a polishing pad attachment to apply the polish to get the best results. Discover the measures that must be followed in order to effectively polish your automobile.

Tools and Equipment Necessary

• Bucket
• Sponge for car cleaning
• hose with a long handle and a brush connected
• Cloth made of microfiber
• With a polishing attachment, an orbital polisher or a random orbit sander may be used.

Requirements for Materials

• Bug stain removal solution
• Car wax is a kind of polish.
• Use car cleaning soap or mild dish soap to clean your car.
• Heavy-duty shop towels are available.
• Using alcohol as a rub
• Water

Project step-by-step (6)

Step 1:  Wash your car

• Using a liberal quantity of car soap, coat the inside of your bucket and then fill it with water.
• Using a hose-attached brush, thoroughly clean the whole car, removing any big chunks of dirt or debris that have accumulated.
• Wet your sponge and make sure it’s completely saturated with soap before rubbing it firmly over the vehicle’s body, one part at a time.
• After cleaning, thoroughly rinse each portion of the car to ensure that the soap suds do not dry on the surface and create stains.

Step 2: Bug stains that refuse to go away

• After washing the car, check for insect spots or other tenacious particles of dirt that may have remained on the surface.
• Spray these places with insect stain remover and then rub them away with a heavy-duty shop cloth until they are no longer visible.
• Use rubbing alcohol and a second shop towel to clean off tree gum or other stains that the insect stain remover couldn’t get rid of.

Step 3: Afterwards, rinse and pat dry.

• Use your hose-attached brush to give the whole vehicle a last rinse, being sure to remove all of the insect stain remover, rubbing alcohol, and any lingering soap suds that may have accumulated.
• Dry the whole vehicle with a microfiber cleaning cloth, being cautious not to scratch it.

Step 4: Prepare best car polisher

• Connect a foam polishing pad to the end of your polisher and plug it in.
• A substantial amount of car polisher, about two inches in diameter, should be dispensed onto the pad.
• Place the polisher pad on the vehicle’s bodywork to polish it. Before turning on the polisher, make sure that the pad and polish are securely embed in the surface of the car. Otherwise, it will splatter polish all over the place.

Step 5: Apply Polish One Section at a Time

• Use a low-to-medium speed setting on the polisher, and then move it gently over the vehicle’s surface to polish.
• The polish should be spread thinly over the vehicle’s surface so that it generates a white haze. But not so thin that you can’t see it anymore. Additional polish may be use as required.
• One part of the vehicle’s body should polish at a time, and no more. It’s important to remember not to remove the polisher from the car until it has totally stopped spinning.
• Take your time with the polisher, going over each part for five to fifteen minutes at a time, until you’re satisfy you work the polish into every inch of the automobile paint in that section.
• In the case of compact automobiles, expect to spend just a few minutes on each area, and up to 15 minutes each piece in the case of big SUVs and trucks.
• After polishing, rinse each part with your hose-attached brush, brushing carefully to remove any remaining polish residue.
• Polish all portions in the same manner, washing each piece when it is finish.

Step 6: Finish with a final rinse and drying.

• Following the completion of the polishing process, rinse the whole car once again, scrubbing softly with your hose-attached brush to remove any residual shine.
• After that, just dry the car with your microfiber towel and you finish.

Visit Website