Check The Quality Of Plastering Done At Your Construction Site

For any construction project, plastering is one of the most important tasks. When performing this job, the professional plasterer will use mortar to layer the uneven surface of the wall. It is mainly applied to the bricked walls and ceiling.

The plastering job has to be done on both sides of the walls – inside and outside. For interiors and exteriors, the quality of plastering might not be the same. You can hire the best plastering in Auckland services for plastering works.

Professional plastering services usually ensure that the job has been performed best. The quality of the plaster on the surface will decide the quality of the paint on the walls. Expert always follows their basic checklist to ensure the job is done best.

Four points to consider when performing your plastering quality checks

Surface cleaning

This is the task that is always performed by the plastering team before starting the plastering job. If the project is a part of the new construction site, then the surface needs to be cleaned. Different techniques of plastering of walls are used by the expert team.

This task will ensure that there are no concrete and debris particles on the walls or ceiling before the plaster is applied. Loose particles will prevent the formation of a strong bond in-between the plastering material and the wall.

Check for roughness on the surface

It certainly is not possible to apply plaster material to a surface that is smooth and even. The expert team will try and create slight roughness on the surface. If the surface is rough then the plastering material will stick easily to the bricked walls.

So if the concrete surface is smooth, the team will create grooves in between the bricks so the plastering material can form a strong bond with the walls.

Eliminate unevenness

Once the plaster material is applied to the surface, unevenness has to be removed. There are special tools that the professional team will use to check the uneven surface. All undulations will be treated at this time so the plastered surface is smooth.

Before the plaster is applied the surface has to be rough. But after the plaster is applied the surface should be smooth. This is important because the paint can be applied with ease on the walls. This also offers durability to the surface.

Check for discontinuity

Discontinuity on the plastered surface is never good. If the plaster has discontinuities then cracks are obvious. The entire plaster coating could also come down before the walls get dried. This is a flaw that experts will never leave un-checked.

They ensure that a thin layer of plaster is applied on the top so the discontinuities can be removed completely.

Once all the above tasks have been performed the team will perform a final inspection of the wall. This helps them understand if the wall is fit for being painted or not. In most cases, the professional team will allow the plaster to dry for three to four days.

Post Views: 502